ANTIFOULING STRIPPER DECAPANTE AL AGUA

ANTIFOULING STRIPPER DECAPANTE AL AGUA

Special water-based stripper for the easy removal of antifouling paints, eliminating the need for scraping, sanding, blowtorching, etc.

Suitable for use on metal, stainless steel, wood, and fiberglass surfaces.

Water-soluble.

Not recommended for aluminum or galvanized surfaces.

Coverage: 3–5 m²/L depending on the type of antifouling and the number of coats applied.

APPLICATION INSTRUCTIONS

Application method: Roller, brush, or spray.

Procedure: Apply a thick layer and allow it to sit for approximately 2 hours. Then apply a second layer and let the stripper soften the old antifouling paints for 24 hours.
Clean the surface using a high-pressure water jet until all residues are completely removed.
If necessary, repeat the process.
Rinse with water, allow the surface to dry, and proceed with the application of the required new antifouling coatings.